Cables and Networking
Available Cables
Cable length for insertion in chain is shown below together with a picture illustrating the chain installation.
This is the cable list for the patch panel that serves the standard rack positions. The lenght of the cables between the patch panels (without user cables) is 17m
| Cable Type | Cable Characteristic | Connectors to be mounted on users cables (control room and irradiation area patch panels) | Number of cables availables |
|---|---|---|---|
| Multiconductor (signal) – twisted pairs 24x2x0.5mm2 | NE48 CERN SCEM: 04.21.52.150.2 | Burndy 48 pins male plug type (48BPMB) CERN SCEM: 09.31.05.280.9 Souriau UT062448PH (metal cover) or UTG62448PN (plastic cover) Male contacts CERN SCEM: 09.21.05.C | 10 |
| PROFIBUS | VE2L SCEM: 04.21.60.020.4 | Profibus male SCEM: 09.10.10.150.3 | 4 |
| Single mode optical Fibres | Characteristics | Connector E2000/APC | 24 |
| Multimode optical fibers | Characteristics | Connectors ST | 24 |
| Multimode OM4 fibres with MPO connectors | OM4 cable fibre | MPO(12) type A | 6 |
| ETHERNET Cat 5 – 4 x 2 x AWG 26/7 | SCEM:04.21.70.103.0 | RJ45 – CERN SCEM: 09.65.10.106.8 | 12 |
| Coaxial (signal) – common ground | CB50 SCEM: 04.61.11.225.6 | BNC male connector SCEM: 09.46.11.700.4 | 30 |
| Coaxial (signal) – Isolated | CB50 SCEM: 04.61.11.225.6 | BNC male connector SCEM: 09.46.11.700.4 | 20 |
| FIP Bus | VE2R SCEM: 04.21.60.120.1 | Harting HAN EE 46+1 Male. Housing size 24B. SCEM: 09.21.07.072.6 | 10 |
| 230V power supply. 6A max (no remote power cycle possible) | / | Standard 230V swiss plug male SCEM: 09.00.03.020.2 | 10 |
| Multiconductor (power) 5×1.5mm2 | PH5EJ SCEM: 04.08.61.735.4 | HARTING HAN Q7/0 male SCEM: 09.21.07.024.6 | 10 |
| 400V power supply. 32A max (no remote power cycle possible) | / | 32A CEI plug male SCEM: 09.00.10.032.5 | 4 |
| 400V power supply. 63A max (no remote power cycle possible) | / | 63A CEI plug male | 4 |
| Connection to ground | 10mm screw + nut | 4 | |
| Multiconductor (signal) twisted pairs 12x2x0.22mm2 | MCA24 SCEM: 04.21.48.324.9 | Sub-D 25 male SCEM: 09.21.21.100.1 | 4 |
| Multiconductor (signal) twisted pairs 4x2x0.22mm2 | MCA8 SCEM: 04.21.48.308.9 | Sub-D9 Male SCEM: 09.21.21.020.0 | 6 |
| Multiconductor (signal) twisted pairs 2x2x1mm2 | NG4 SCEM: 04.21.52.180.6 | Burndy 4 pins male plug type (4BPMB) CERN SCEM: 09.31.05.200.5 Male contacts CERN SCEM: 09.21.05.C | 4 |
| SAMTEC single ended (µcoax) | Characteristics | Integrated with cable | 3 |
| Samtec differential pair (µcoax) | Characteristics | Integrated with cable | 3 |
| Coaxial high voltage | Characteristics CBH50 SCEM: 04.31.51.555.2 | SHV female plug 1HVPF SCEM:09.41.25.100.1 | 14 |
| Unipolar Cable (Power) | Characteristics | Marechal MAR454800P SP | 4 |
| Multiconductor (signal) twisted pairs 13x2x0.25mm2 | Characteristics ND26 SCEM: 04.21.52.020.1 | Sub-D 25 male SCEM: 09.21.21.100.1 | 10 |
| Coaxial CKC50 (triax cables) | Characteristics CKC50 | 1T50PMB C4249-ISS3 – C4250-ISS3 | 10 |
| Serial Link (RS485) | MCA8 SCEM: 04.21.48.308.9 | Sub-D9 Male SCEM: 09.21.21.020.0 | 4 |
| USB | USB Type A | 5 | |
| VH4 | SCEM: 04.51.10.200.6 | 2 | |
| Coaxial low attenuation – RF | CK50 SCEM: 04.61.11.265.8 | N plug male 1N50PMI SCEM:09.46.12.020.7 | 8 |
| Multiconductor (power) 2x16mm2 | PN2SB SCEM: 04.08.61.466.6 | Harting Han-Modular 2 male contacts 70A. Harting: 09140022641 +19140010401 + 09140010311 | 4 |
| Vacuum cables TFA3 | 6 | ||
| Vacuum cables SVA3 | 6 | ||
| Vacuum cables MCT32 | 1 | ||
| Vacuum cables TCA3 | 1 | ||
| MCT32 | Thermocouple cable type K | Female thermocouple type K connectors RS: 455-9742 | 16 |
This is the cable list for the patch panel that serves the overhead conveyer.. The lenght of the cables between the patch panels (without user cables) is 35m.
CHARM Overhead Conveyor
| Function | Cable type | Connector type (User cable control room) | Connector type (User cable Overhead) | Number of cables available |
|---|---|---|---|---|
| Coaxial | CB50 | Male BNC | Female BNC | 6 common ground, 4 isolated |
| Coaxial low loss | CK50 | Male N | Female N | 2 |
| Multiconductor | MCA24 | Sub-D25 Male | Sub-D 25 Female | 2 |
| Ethernet | VA8C | RJ45 Male | RJ45 Female | 2 |
| Multiconductor | NE48 | Burndy 48 pin plug Male | Burndy 48 pin Socket Female | 1 |
| Power | PH5SJ | Harting Q7 Male (without locking system mechanism) | Harting Q7 Male (with locking system mechanism) | 3 |
| Optical fibers | 6x Singlemode 9/125 | E2000/APC Male | E2000/APC Female | 6 |
| Optical fibers | 6x Multimode 50/125 OM4 | ST/PC Male | ST/PC male | 6 |
| Ethernet Connection for Technical Network | |
|---|---|
| Ethernet Preparation room (dry run) : | 157-1-6209, outlet 6209/02 to 6209/23 |
| Ethernet Control room (irradiation test) | 157-1-7107, outlet 7107/02 to 7107/23 |
For the registration of the devices/instruments through the network, please use the website: https://network.cern.ch/. For any information on cables, please click here: https://charm-cables.web.cern.ch/.
| Water distribution | Demineralized water. Pressure adjustable up to 10 bars, flow 20 l/min. water tubes provided by CHARM. User devices should be equipped with male parker connectors (SCEM: 41.62.00.010.5) inlet + oultet. Water leak detection system to be provided by users |
| Gas distribution: | Bottle provided by users and stored in dedicated area bld 157. neutral gas only. Flow adjustable inside beam area. Plastic tube to be installed in the cable has to be provided by users (6- 8mm external) SCEM: 38.35.10.B |
| Machine Timing | Timing from PS accelerator : Beam forward, beam start, beam end, beam presence. LEMO 00 connectors, TTL signals pulse width 1us |
| Remote reset : | 10 channels on beam area patch panel BNC connectors : twido cfp-157-crr2. Channel names : charm_reset1 to charm_reset15 |
| Test Position | Cable length in the flexible chain |
|---|---|
| # 1 | 15 m |
| # 2 | |
| # 3 | |
| # 4 | 19 m |
| # 5 | |
| # 6 | |
| # 7 | |
| # 8 | |
| # 9 | |
| # 10 | |
| # 11 | 24 m |
| # 12 | |
| # 13 |
